Suspension Spring Adjuster Tool

[dr1979-340]

Anyone have a 57001-3507 Spring Adjuster Tool?  I want to make one and need a good pattern.  I've busted up my knuckles enough!!

[mswyka]

We have been using a Craftsman breaker bar to adjust the springs.  The hole in the end of the wrench is the right diameter for the end of the spring.

[mswyka]

The breaker bar is the bar that is second from the bottom in this photo.

[dr1979-340]

Thanks!!  I'll see what's out at my Dad's shop.  That's easier than trying to make one.

[Lloyd (ljm)]

Mark


 Any chance I could hire you to come organize my tools?

 Lloyd

[SySteMAtiC72]

If you are wanting a tool resembling the Kawasaki tool search for an adjustable hook spanner wrench.

http://aboloxtools.com/wrenches/other-wrenches/williams-471-adjustable-hook-spanner-wrench-3-4-to-2/

[mswyka]

Mark


 Any chance I could hire you to come organize my tools?

 Lloyd

Lloyd, the socket holders were more than I wanted to spend, but in the grand scheme of things, well worth what I paid. I spent way too many years fishing around in the bottom of the tool box for the correct socket size.  As far as I am concerned, these get two thumbs up around here.  I will send you pictures of my two wrench organizers.

[gixxer6]

Mark, 

After moving to my new place my garage is an absolute mess.  After you're done at Llyods, stop at my place and organize my garage.  I'll give you 6 broken grab handles, 4 cracked dash panels, 7 cracked filler necks, and 11 slightly used crank seals with matching melted pistons.   

Thanks!

[5kaws]

If you are wanting a tool resembling the Kawasaki tool search for an adjustable hook spanner wrench.

http://aboloxtools.com/wrenches/other-wrenches/williams-471-adjustable-hook-spanner-wrench-3-4-to-2/

He's talking about the 4 suspension  springs , not the shock spring.   The drifter uses just a shock not shock/spring like the invaders.   Mike

[mswyka]

Mark, 

After moving to my new place my garage is an absolute mess.  After you're done at Llyods, stop at my place and organize my garage.  I'll give you 6 broken grab handles, 4 cracked dash panels, 7 cracked filler necks, and 11 slightly used crank seals with matching melted pistons.   

Thanks!

Can't pass up a deal like that!  Those parts would  let us finish two new sleds!

[5kaws]

Me and my dad where gonna make some of these tools.  Thinking now it might be a good idea because seems like a lot of people can benefit from them.    We did make a tool out of  piping. It was thick and it worked great didn't bend at all.     I'll have to find it and snap a pic and perhaps take orders??  Lol.

[dr1979-340]

Mike, I'd like to see a picture of it to give me an idea on how to fabricate one.

[BornagianKawi]

Hope this helps.

[dr1979-340]

Thanks.  It give me a good idea on how to fabricate one.