KawasakiTrax Community
General Category => General Discussion => Topic started by: Checkmarks on December 26, 2012, 11:11:45 PM
-
As I understand (some) things, the 4/6 motors came with the Mikuni carburetors. It was the 81-82 Ltds that came with the 'other' type of carburetors.
My question is what jetting is in the 4/6. I can but assume since the motor puts out more Hp than a standard round head they must be larger.
What is the correct jetting for the 4/6
-
130 main jet Invader is 150
35 pilot Invader is 30
120 RRT power jet same as Invader
6DH7-3 jet needle same as Invader
P9 (159) needle jet Invader is P6
idle is 2500
-
Thank you so much Bob,
Smoke is going to come out of my garage and it will smell pretty. Just in time for the oval races. Will get up some pictures for you fellows in the next few days.