KawasakiTrax Community

General Category => General Discussion => Topic started by: Joel on November 06, 2014, 08:43:05 PM

Title: 1979 Drifter parts
Post by: Joel on November 06, 2014, 08:43:05 PM

Hello, was curious if anybody has a chain case cover gasket #050909. Also needing the plastic spindle bushings(4) #090722. I have tried the 1981 drifter spindle  bushings but they are a different size. Any help would be appreciated. Thank you Joel

Title: Re: 1979 Drifter parts
Post by: dr1979-340 on November 07, 2014, 04:41:45 PM

I've found if I use the 1980 Drifter parts manual numbers for searching I've had better luck.  They used a lot of the same parts on the 1980.  92055-3505 is from the 1980 Drifter parts manual.  The 050909 is a Sno-Jet number that Kawasaki used in the 1979 parts manual.  I bought one off Ebay a couple months ago.  Here is a link:

http://www.ebay.com/itm/like/151323911852?item=151323911852&ttle=Kawasaki+Drifter+Chain+Case+O-ring+New+Old+Stock+92055-3505+Genuine+Kawasaki&vectorid=229466&tc=US

Title: Re: 1979 Drifter parts
Post by: Joel on November 07, 2014, 06:09:12 PM

Thanks ,I did find a gasket in my stash after looking at the updated parts #. But still looking for the spindle bushings #92028-3518 if anyone has any. Thank you Joel

Title: Re: 1979 Drifter parts
Post by: Interceptor398 on November 08, 2014, 08:49:10 AM

The spindle bushings are meant to have a little play in them.  How bad are yours?

Title: Re: 1979 Drifter parts
Post by: Joel on November 09, 2014, 05:36:49 PM

I have one broken one, so I figured I would replace them all. I did find some , now just need them shipped. Joel

Title: Re: 1979 Drifter parts
Post by: dr1979-340 on September 17, 2015, 10:42:58 AM

Joel, where did you find the spindle bushings?  I'm in need of two of them for my 1979 340 Drifter.