KawasakiTrax Community

General Category => General Discussion => Topic started by: Teherr on January 03, 2019, 06:22:03 AM

Title: crank question
Post by: Teherr on January 03, 2019, 06:22:03 AM

I am changing engine seals from 1980 liquifire T7 motor and which has a strange C spacer -see attached pic.  there was only one.  what is the purpose?  This was between one of the guide rings and a bearing.

Terry

Title: Re: crank question
Post by: rminier on January 03, 2019, 12:44:17 PM

 Zip down to page 65 on the attachment....you will see that it is a shim that came in various thicknesses to adjust the endplay of the crankshaft.

http://www.vintagesnow.com/Kawasaki_files/1979_Invader_Intruder.pdf

Title: Re: crank question
Post by: Teherr on January 03, 2019, 01:00:28 PM

Ah yes, I see.  thanks.  I can't tell the exact placement?  Which side of the bearing the left of the crank. 

Title: Re: crank question
Post by: rminier on January 03, 2019, 01:08:23 PM

Sent you a PM.. ;)