Tech Information > Tips and Tricks

1979 440 Drifter Clutch

(1/1)

bbap:
Looking for any tips on the bolt size needed to remove my clutch using the "fill the void with grease/oil" method.  Markings on the clutch indicate:  John Deere, Comet Mod. 100 C-P. 

I found:
-9/16 fine 18 tpi, and
-3/4 fine 16 tpi

and now unsure...

Steve

Interceptor398:
I know nothing about a John Deere clutch, but maybe someone else on here does.

rminier:
 I don't know about that clutch for sure, either.....but, the vast majority (not all) Comet's use the 3/4 inch  16 tpi.

bbap:
Thanks guys.  Next stop Lowes with the engine in a box.  Heavy bugger, hope their carts can take it!

Navigation

[0] Message Index