« previous next »
Pages: [1]

Author Topic: LTD Carb Mikuni Conversion  (Read 2586 times)

0 Members and 1 Guest are viewing this topic.

Liquifried

  • Newbie
  • *
  • Posts: 2
LTD Carb Mikuni Conversion
« on: October 31, 2013, 03:55:35 PM »
Going through a 1981 LTD and the butterfly carbs are shot. Before I go and find used carbs, I was wondering if anyone has done a Mikuni conversion. If so, what size and what are the jetting specs. I have carbs left over from Invaders and Liquifires that I may try to rework.

Thanks!

Joe
Logged

kawhead

  • Hero Member
  • *****
  • Posts: 524
Re: LTD Carb Mikuni Conversion
« Reply #1 on: November 01, 2013, 12:13:34 PM »
i used a set off an invader on my 82 ltd..... ended up with stock jetting after starting rich.. made a small bracket to make the oil cable work,440 invader cable also
Logged

Liquifried

  • Newbie
  • *
  • Posts: 2
Re: LTD Carb Mikuni Conversion
« Reply #2 on: November 01, 2013, 05:30:33 PM »
Thanks!  I have a set of Mikuni's from a Liquifire that are in great condition. I may start there and tweak.
Logged

jskal

  • Newbie
  • *
  • Posts: 31
Re: LTD Carb Mikuni Conversion
« Reply #3 on: November 07, 2013, 07:40:54 PM »
I have an available set of 36mm's from an Invader that are freshly cleaned and set to go. Let me know if interested.
Logged

invader87

  • Jr. Member
  • **
  • Posts: 51
Re: LTD Carb Mikuni Conversion
« Reply #4 on: December 14, 2013, 08:15:49 AM »
what mains did anyone end up using in a mik. ltd set up?
Logged

kawhead

  • Hero Member
  • *****
  • Posts: 524
Re: LTD Carb Mikuni Conversion
« Reply #5 on: December 14, 2013, 10:04:30 AM »
i end up with stock invader set up after starting rich and working my way down
Logged
Pages: [1]
« previous next »