« previous next »
Pages: [1]

Author Topic: Electric water temp guage  (Read 1281 times)

0 Members and 1 Guest are viewing this topic.

Ameritude

  • Full Member
  • ***
  • Posts: 136
Electric water temp guage
« on: August 27, 2021, 12:50:29 AM »
Might be a stupid question, but I'm wanting to put an electric water pump gauge on my sled, but it needs a 12v source, do you guys know of any way to make this work without a battery. If someone has done it with a battery, was it difficult, im not against it but simplicity is better.
Thankyou in advance
Logged

gixxer6

  • Hero Member
  • *****
  • Posts: 1569
Re: Electric water temp guage
« Reply #1 on: August 27, 2021, 08:24:41 AM »
Why use an electric gauge?  I've had really good luck with the Bosch aftermarket temp gauges. 

To use my large automotive tach on the Intimidator, I added a voltage regulator with rectifier from an e-start sled and a small lead acid battery.  It's not ideal, but it works. 
Logged

Ameritude

  • Full Member
  • ***
  • Posts: 136
Re: Electric water temp guage
« Reply #2 on: August 27, 2021, 12:27:22 PM »
My original reason is because you can hide wires alot easier than a line but maybe simpler is better.
Logged
Pages: [1]
« previous next »