KawasakiTrax Community
General Category => General Discussion => Topic started by: rogers26 on November 21, 2017, 07:07:50 PM
-
Thanks for the add! I have a intruder and was wondering if the drifter 440 is the same motor
-
Welcome to the site!!! They have some things in common but for the most part are not the same.
-
Really want to build a couple fan motors for oval racing and need to know if the crank , jugs and heads are the same? intruder, drifter, or other models
-
Intruder jugs are set up for twin carbs and the jugs can be on either side. Drifter jugs are set up for 1 carb and the cylinders are only left or right. I've never tried it but the bottom ends may work for both.
-
398. Thanks I am new with kawasaki but ready two learn
-
Intruder jugs will fit just fine on a Drifter bottom end.
Any of the T7 engines can swap jugs.