KawasakiTrax Community

Site News => Discussion & Help => Topic started by: Vader440 on November 30, 2019, 08:22:09 AM

Title: '79 Invader
Post by: Vader440 on November 30, 2019, 08:22:09 AM

I'm can't seem to get one air bobble out of the oil feed line. I've tried everything and it keeps reappearing in the same spot. Any advise?

Title: Re: '79 Invader
Post by: Checkmarks on December 02, 2019, 02:07:31 PM

Only way to get an air bubble in the oil line is if you have a bad line (hose), or poor clamp.

Title: Re: '79 Invader
Post by: wisc79intruderguy on December 18, 2019, 10:18:24 AM

Being its a 1979 are your lines hard? If so id replace ask myswka or interceptor 398 about bleeding the lines the kawi system is diff than doos etc jmo.