« previous next »
Pages: [1]

Author Topic: Intruder Crank Gear  (Read 3146 times)

0 Members and 1 Guest are viewing this topic.

Joel

  • Full Member
  • ***
  • Posts: 170
Intruder Crank Gear
« on: October 11, 2013, 07:37:01 AM »
I've got the 82 Intruder motor going back together and the crank gear that drives the oil pump doesn't "shrink" back down and seat onto the crank. It's just loose enough that it will grab at times when rotated. What would you do? Joel
Logged
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519

gixxer6

  • Hero Member
  • *****
  • Posts: 1566
Re: Intruder Crank Gear
« Reply #1 on: October 11, 2013, 11:41:12 AM »
Try another gear. 
Logged

mswyka

  • Hero Member
  • *****
  • Posts: 1792
Re: Intruder Crank Gear
« Reply #2 on: October 11, 2013, 04:24:56 PM »
Are you sure you are putting it on far enough?  If I recall there is a subtle step in the crank right at the gear.  If in the correct position, I agree, go to a different gear.
Logged
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

Joel

  • Full Member
  • ***
  • Posts: 170
Re: Intruder Crank Gear
« Reply #3 on: October 11, 2013, 06:57:03 PM »
Does anyone have an extra gear available? This is the only Intruder/Invader bottom style case I own. Everything else I have is 81-82 Ltd. parts. Thanks, Joel
Logged
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519

mswyka

  • Hero Member
  • *****
  • Posts: 1792
Re: Intruder Crank Gear
« Reply #4 on: October 14, 2013, 06:08:37 PM »
I have a spare - PM me your address
Logged
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440
Pages: [1]
« previous next »