KawasakiTrax Community
General Category => CLASSIFIEDS: buy, sell or trade here => Topic started by: JDmatt on November 08, 2014, 04:08:04 PM
-
Working on the skis on my Invader today, I found that the leaf spring rear bolt was seized in the aluminum bushing inside the spring loop on 2 of the 4 skis I tried to take apart, and one that did come apart was trash. I found that I have a reproduction suspension shaft made for JDs that is correct for this, so if anyone needs these, I can cut some to the 2" length for the leaf springs.
Matt
-
FYI, you can also find them here:
http://www.mcmaster.com/#unthreaded-spacers/=uk94x4