KawasakiTrax Community
General Category => CLASSIFIEDS: buy, sell or trade here => Topic started by: Wildgilly on December 12, 2013, 12:30:44 PM
-
I am a 1981 LTD rider and now the proud owner of a 1980 Invader 4/6 Ltd ( which is not mobile at the moment ). I am looking for info on the bottom ends of the subject machines, are there any of these cranks interchangeable? If so which models with which? I also have other query on the clutching throw ramps , and on the drives the helix ramp degree' . I am looking for dimension specs so we can fabricate if I can't find replacement parts. All comments and or contacts that can reply I thank you in advance. Regards wildgilly.
-
78-81' 340 & 440 Invader cranks are the same as the 80' 4/6 LTD
81-82' LTD cranks are the same, and 82' 550 Interceptor cranks are slightly different but will interchange without issue.
I have never had trouble finding replacement clutch parts. Most can be found on ebay, some parts are still made by Kawasaki for some of there ATV's. See here http://kawasakitrax.com/kawiforum/index.php?topic=11.0
I am sure I have a good used crank for your 4/6 PM me if you're interested. I am sure that I do not have an extra 81-82 LTD crank.
-
Thank you G appreciate that response , I will look into the ramps for sure . PM on parts later thank you again
-
f and j ramps are the best for performance
-
Thanks for the info guys I am playing with F ramps and white spring bouncing in between 54 and 57 grams per , we have an amazing amount of snow up here ;D .