Trying to make some progress tonight on the invader.
First question: the carbs are really nasty. When I pulled them apart some, by my estimates, 10 y/o gas came out. Floats would hardly move, one of the needle/seats is froze open, etc. I went out and got that berryman chem dip stuff and it says remove the plastic from the carbs. Do i have to pull the overflow elbows and that other plastic elbow from the upper halves of the carbs or am I fine leaving them on? If they need to come off, do they screw off?
Next, when I pulled the gear case cover on the clutch side, that big roller bearing is stuck on the crank. Is that pressed on or should i start beating on that to get it off?