KawasakiTrax Community

General Category => CLASSIFIEDS: buy, sell or trade here => Topic started by: DougKauer on October 24, 2014, 08:28:28 PM

Title: suspension spring tool
Post by: DougKauer on October 24, 2014, 08:28:28 PM

Hello, does anyone have the tool for the suspension springs. looking for one.  Thanks,  Doug

Title: Re: suspension spring tool
Post by: Interceptor398 on October 25, 2014, 07:21:34 AM

That is one tool I have yet to see in person.

Title: Re: suspension spring tool
Post by: mswyka on October 26, 2014, 04:00:58 PM

Doug, I have a Craftsman 1/2" breaker bar that I use.  The spring fits perfectly in the hole at the end of the handle.  It is long enough that it gives me plenty of leverage to install or remove the springs.  Before that I was using a large pair of channel lock pliers.  The breaker bar is an incredible improvement.

Title: Re: suspension spring tool
Post by: Dandb7 on October 26, 2014, 05:34:41 PM

Hi Mswyka, if you could post a picture of your breaker bar that would be great.....

Thanks for the info..

Title: Re: suspension spring tool
Post by: DougKauer on October 27, 2014, 10:01:41 AM

Hi mswyka, thanks for the info, I'll try to find one today.

Title: Re: suspension spring tool
Post by: mswyka on October 27, 2014, 05:49:01 PM

Breaker Bar  aka  Spring Tool

Title: Re: suspension spring tool
Post by: Dandb7 on October 28, 2014, 05:20:38 AM

Thanks for the picture mswyka.....appreciated !!