KawasakiTrax Community

General Category => General Discussion => Topic started by: mrcsnow on December 14, 2014, 12:42:09 PM

Title: 1982 Kawi Intruder parts help
Post by: mrcsnow on December 14, 2014, 12:42:09 PM

1982 Kawasaki Intruder parts needed

looking for NOS or nice used
-airbox
-carburetors 2-34mm
-throttle cables
-windshield
-seat
-cdi box with plug wires

mrcsnow@yahoo.com
(815)762-6868

Thanks -Matt

Title: Re: 1982 Kawi Intruder parts help
Post by: mswyka on December 15, 2014, 06:45:38 PM

Matt, we have one low black windscreen left.

On those carbs, did 82 use 34mm?  I had thought that all of the Intruders used 32mm powerjet carbs.

Title: Re: 1982 Kawi Intruder parts help
Post by: mrcsnow on December 16, 2014, 11:33:53 AM

Yes my bad they have 32mm pjs.  Do you know how many 1982 Kawasaki Intruders were made?
I found a windshield
SPI throttle cables are no longer available.
I'm also looking for a cdi box with plug wires

thanks -Matt

Title: Re: 1982 Kawi Intruder parts help
Post by: mswyka on December 16, 2014, 01:10:59 PM

Someone here on the site should have the statistics with the number of sleds produced each model year.  Have you tried Dennis Kirk for the throttle cable?  While it may not be perfectly identical, the Invader cable should be able to be made to work.

Title: Re: 1982 Kawi Intruder parts help
Post by: kawhead on December 17, 2014, 08:08:25 AM

all intruders use similar carbs, just jetting changes.

Title: Re: 1982 Kawi Intruder parts help
Post by: foxspoiler on December 17, 2014, 09:08:11 AM

1982 Models

Intruder

Color Crimson Red

Model no: ST440-A4 Engine: TA440C

Frame serial number sst440a4 -012600---014601

Engine serial number TA440C-012603----015629

2001 total produced

Title: Re: 1982 Kawi Intruder parts help
Post by: mrcsnow on January 03, 2015, 06:39:22 PM

I was able to find everything except a coil pack with plug wires for a 1982 Intruder.

Does anyone have one or know someone who does have a coil pack with wires?

Thanks -Matt

Title: Re: 1982 Kawi Intruder parts help
Post by: gixxer6 on January 03, 2015, 08:40:49 PM

I have a good used coil and wires off from an Invader, but I'm not sure if it'll fit?  I'm sure the coil is the same, but the wires might be different? 

Title: Re: 1982 Kawi Intruder parts help
Post by: kawhead on January 05, 2015, 08:12:02 AM

82 intruder used the box/coil 1 piece unit....