KawasakiTrax Community

General Category => The Interceptor Gang => Topic started by: Lloyd (ljm) on January 11, 2016, 03:36:50 PM

Title: crank seals
Post by: Lloyd (ljm) on January 11, 2016, 03:36:50 PM

 What size crank seal for an Interceptor?

Title: Re: crank seals
Post by: Checkmarks on January 14, 2016, 10:07:58 PM

Identical size to 440 LTD (81-82).

Title: Re: crank seals
Post by: Interceptor398 on January 15, 2016, 07:43:19 AM

Manufactures supply has LTD gasket sets, the only difference is the copper rings.

http://www.mfgsupply.com/snowmobile/snowengine/snowwinderosa/snowkawwinderosa/snowkawwinderosacomplete/711118.html

Title: Re: crank seals
Post by: gixxer6 on January 15, 2016, 08:33:00 AM

I believe I had a problem with the full kits including the correct crank seals.  It seems that one of them was either missing, or was the wrong size.  I remember finding the correct Winderosa part number for that crank seal and ordering a handful of them.  I will try to post the part number sometime this weekend.