KawasakiTrax Community

General Category => General Discussion => Topic started by: ltdman on February 17, 2014, 08:06:32 AM

Title: Invader Part#'s The Same??
Post by: ltdman on February 17, 2014, 08:06:32 AM

Can anyone tell me if the part#'s are the same for the rear storage box and for the lid  on  the following sleds. Will they interchange? I have a part# book on the LTD. Thanks. Appreciate any info. :)
                                                                                               
                                                                                                                                           1980 Invader 440

                                                                                                                                           1980 Invader 440 LTD 4/6>storage box>39012-3501
                                                                                                                                                                                    >lid>14025-3502
                                                                                                                                           

                                                                                                                     

                                                                                   

Title: Re: Invader Part#'s The Same??
Post by: Interceptor398 on February 17, 2014, 04:23:20 PM

All Invaders and Intruders used the same trunk lid including the 4/6.  I have an 80 drifter that also uses the same lid as the Invaders and Intruders. The 81 & 82 LTD's have a different trunk lid but my 81 drifter has the same lid as the LTD's.  There are many of them out there,  fi you keep looking you will find one that is resonably priced.

Title: Re: Invader Part#'s The Same??
Post by: ltdman on February 17, 2014, 07:21:57 PM

Interceptor398...thanks for the great information in regards to the Invader trunk issue, This will make searching a whole lot easier. Kind of thought maybe the Intruders would interchange, but was in doubt that a Drifter would also work. Your mentioning lids, but is the box its self the same on all these different models? Thanks again and safe sledding.

Title: Re: Invader Part#'s The Same??
Post by: Interceptor398 on February 17, 2014, 08:04:50 PM

I would assume the lid matches the box.

Title: Re: Invader Part#'s The Same??
Post by: kawhead on February 18, 2014, 08:05:32 AM

81 82 ltd's use a square heat exchanger like the 550's,so that box is different

Title: Re: Invader Part#'s The Same??
Post by: jimvw57 on February 18, 2014, 10:09:10 AM

Invader door goes around the tail light, LTD and 81 on has light in the door.

Title: Re: Invader Part#'s The Same??
Post by: ltdman on February 19, 2014, 04:23:39 AM

Apparently 1980 LTD's were the last year for having the lid around the tail light, because that's how mine is. They must have been in the class with the regular Invaders along with the Intruders and Drifters. Looks like the 81-82 changed design for rear trunk storage...Correct me guys if I'm wrong. Any of you have a nice storage box laying around to fit my 80 LTD?  Thanks again.

Title: Re: Invader Part#'s The Same??
Post by: jimvw57 on February 19, 2014, 11:39:23 AM

The storage box is part of the seat base.

Title: Re: Invader Part#'s The Same??
Post by: gixxer6 on February 19, 2014, 06:51:26 PM

The storage box is riveted to the seat base, it is not one piece.  At least on the Invaders and the 4/6...