« previous next »
Pages: [1]

Author Topic: Invader Temp Gauges  (Read 2778 times)

0 Members and 1 Guest are viewing this topic.

mswyka

  • Hero Member
  • *****
  • Posts: 1797
Invader Temp Gauges
« on: February 16, 2014, 07:39:28 PM »
440 Invader has been running like a champ.  However, the temp gauge failed.  Anyone have a good source for a replacement gauge?
Logged
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

jimvw57

  • Hero Member
  • *****
  • Posts: 624
Re: Invader Temp Gauges
« Reply #1 on: February 17, 2014, 12:36:17 AM »
I seem to recall a sun pro gauge that was the same size and would thread right in.
Logged

Lloyd (ljm)

  • Sr. Member
  • ****
  • Posts: 459
Re: Invader Temp Gauges
« Reply #2 on: February 17, 2014, 04:51:00 AM »
  There are lots of aftermarket gauges that will fit and work just fine. Take your old one to an auto parts store. They will have one on the shelf that will work.

 Lloyd
Logged
77 SST
78 Intruder
79 340 Invader
80 440 Invader
80 Drifter (bought new)
80 LTD 4/6    X2

Several Deeres

Tory944

  • Hero Member
  • *****
  • Posts: 624
    • Torys Vintage Sleds
Re: Invader Temp Gauges
« Reply #3 on: February 17, 2014, 05:24:47 AM »
I have some used Invader gauges if you decide to stay with original.                  Tory
Logged
Torys Vintage Sleds
Website:  torysvintagesleds.com

ltdman

  • Newbie
  • *
  • Posts: 34
Re: Invader Temp Gauges
« Reply #4 on: February 17, 2014, 08:22:17 AM »
Yes. Go to your local parts store and they should be able to fix you up, just as Lloyd posted. I had the same issue with my 82 JD Luquifire. I found one at Auto Zone that was the correct diameter, in the meantime an original JD one became available. Returned it back to AZ. If the threads mate up, your good to go. I'd take my old one along for comparison. Ride safely!! :)
Logged
Pages: [1]
« previous next »