KawasakiTrax Community
Tech Information => Tips and Tricks => Topic started by: bbap on December 31, 2016, 07:19:55 AM
-
Looking for any tips on the bolt size needed to remove my clutch using the "fill the void with grease/oil" method. Markings on the clutch indicate: John Deere, Comet Mod. 100 C-P.
I found:
-9/16 fine 18 tpi, and
-3/4 fine 16 tpi
and now unsure...
Steve
-
I know nothing about a John Deere clutch, but maybe someone else on here does.
-
I don't know about that clutch for sure, either.....but, the vast majority (not all) Comet's use the 3/4 inch 16 tpi.
-
Thanks guys. Next stop Lowes with the engine in a box. Heavy bugger, hope their carts can take it!