KawasakiTrax Community

Tech Information => General Help => Topic started by: heiner921 on October 15, 2014, 04:57:49 PM

Title: what kit do i need for intruder carbs?
Post by: heiner921 on October 15, 2014, 04:57:49 PM

so I know I have vm32 carbs..... are they zinc or aluminum..... from what I found mikuni made both and they have different rebuild kits.... which one do I need?     I need new float bowl gaskets and new O-rings for the power jet thanks in advance

Title: Re: what kit do i need for intruder carbs?
Post by: Lloyd (ljm) on October 16, 2014, 05:45:59 AM

 Matt at newbreedparts.com will be able to get you gaskets and o-rings. My experience with kits is they have parts you don't need and don't have parts you do need. Best to buy the parts you need

Title: Re: what kit do i need for intruder carbs?
Post by: heiner921 on October 16, 2014, 12:16:55 PM

I actually found the original at my local auto parts store but I'll look to the site for the gasket

Title: Re: what kit do i need for intruder carbs?
Post by: JDmatt on October 16, 2014, 08:51:37 PM

I have to admit I am not familiar with the VM32 on Kawi's but is it safe to assume it uses the same body as the standard VM34?  If so, this is the gasket:
http://www.newbreedparts.com/newbreed/index.php?route=product/product&path=59_63_107&product_id=214