KawasakiTrax Community

Tech Information => General Help => Topic started by: 79Intruder on October 25, 2014, 08:01:37 AM

Title: Drive Axle
Post by: 79Intruder on October 25, 2014, 08:01:37 AM

Hey guys, Looking or a little help? I have a 1979 Intruder 440 I trying to get the Drive Axle off, The book I have is not giving a enough info. Any one got a simple way of removing it? Any help greatly appreciated. Thanks.   

Title: Re: Drive Axle
Post by: Interceptor398 on October 26, 2014, 10:00:49 AM

Pull the parts off each end of the shaft so it slides both ways a little.  It will go far enough that one end will drop down so you can remove it.  Not real simple but not that hard, just takes a little time. 

Good Luck!

Title: Re: Drive Axle
Post by: kawhead on October 27, 2014, 12:25:05 PM

with sprocket and left bearing cup removed it should 'drift 'left if tapped.must clear track drivers also.