KawasakiTrax Community

Tech Information => General Help => Topic started by: Tory944 on February 23, 2015, 03:49:57 PM

Title: 1980 Invader 4/6 Needle & Needle Jet Specs
Post by: Tory944 on February 23, 2015, 03:49:57 PM

  Looking for the "factory" needle and needle jet specs...  going by memory, I "think" the needles were 6DH7, but can't remember what the needle jets were.  P's or Q's?  Any help?  Many Thanks!

Title: Re: 1980 Invader 4/6 Needle & Needle Jet Specs
Post by: Interceptor398 on February 23, 2015, 07:03:55 PM

VM 36 marked 36/90.
Main jet  140
Pilot  35
Power jet  120 Round reverse type
Jet needle  6 DH7-3
Needle jet  P6  (159 series )
Air screw setting  1 1/2 turns
Idle screw setting 7
Idle RPM  2500

Title: Re: 1980 Invader 4/6 Needle & Needle Jet Specs
Post by: mswyka on February 23, 2015, 07:06:58 PM

Looking at my manual, I am seeing the needle jet as a P-6 (series 159)

Title: Re: 1980 Invader 4/6 Needle & Needle Jet Specs
Post by: Tory944 on February 24, 2015, 04:34:58 AM

Thanks guys...  that's a BIG help.  Thanks Mark for the file! 

20 BELOW THIS A.M. WITH ABOUT 3 1/2 - 4 FT SNOW BASE!  IT'S ALMOST MARCH!!!   YIKES!

Title: Re: 1980 Invader 4/6 Needle & Needle Jet Specs
Post by: Interceptor398 on February 24, 2015, 07:36:59 AM

Quote from: mswyka on February 23, 2015, 07:06:58 PM

Looking at my manual, I am seeing the needle jet as a P-6 (series 159)

I made 2 corrections.  Thanks Mark