KawasakiTrax Community

Tech Information => General Help => Topic started by: Pmlecom1 on March 03, 2015, 02:19:31 PM

Title: no lights anywhere
Post by: Pmlecom1 on March 03, 2015, 02:19:31 PM

What would cause the sled to not have any lights , key functiuon or kill switch function.  Obviously I connected the main harness.  Could it be the voltage regulator or something?  Sled runs great, during the day.  I am working the bugs out one issue at a time.

Title: Re: no lights anywhere
Post by: Gilson435 on March 03, 2015, 02:29:37 PM

Are the bulbs blown? A bad Voltage regulator could cause that. Check with a volt meter to see how many volts it's putting out. Could have a bad lighting coil too. Check your wiring and connections. It could be a bad ignition switch as well if it's not making contact in the lights on position.

Title: Re: no lights anywhere
Post by: mswyka on March 03, 2015, 06:10:49 PM

Check to make sure that the wiring harness connector at the engine is connected properly and all the wires are seated fully and making contact.

Title: Re: no lights anywhere
Post by: Interceptor398 on March 03, 2015, 08:38:04 PM

Guess you will need two sleds now.  One for day and one for night!! ;D Mad Kawi strikes again!!  Sorry, could not resist that one.  LOL 8)