KawasakiTrax Community

Tech Information => General Help => Topic started by: JDmatt on January 19, 2013, 04:46:48 PM

Title: Chain Case Seals
Post by: JDmatt on January 19, 2013, 04:46:48 PM

Do you guys have a source or aftermarket part number for the two chain case shaft seals for an '80 Invader?  Thanks in advance!

Title: Re: Chain Case Seals
Post by: mswyka on January 19, 2013, 05:02:34 PM

Matt, I picked them up at NAPA, but I don't recall the numbers.  They are pretty standard.

Title: Re: Chain Case Seals
Post by: JDmatt on January 19, 2013, 06:16:36 PM

Well, I seem to have misplaced my originals after taking them out. 

Title: Re: Chain Case Seals
Post by: mswyka on January 19, 2013, 06:42:24 PM

Oh, I can send you some other old ones if someone else can't get you fixed up with a number.

Title: Re: Chain Case Seals
Post by: mswyka on January 21, 2013, 07:16:04 PM

I found the number for the upper seal  CR 10075.  I will have to knock one out of a spare case to see what the bottom number is.  Won't be able to get to that until the weekend.

Title: Re: Chain Case Seals
Post by: JDmatt on January 22, 2013, 06:36:38 PM

Oh you don't have to do that.  I'll figure something out.  Thank you!

Title: Re: Chain Case Seals
Post by: Invader440 on January 22, 2013, 10:50:17 PM

Lower should be Chicago Rawhide CR12384 or SKF 12384.  From what I understand, SKF bought out Chicago Rawhide.