KawasakiTrax Community

Tech Information => General Help => Topic started by: Habbeli on March 05, 2013, 03:35:13 PM

Title: Muffler on Intruder
Post by: Habbeli on March 05, 2013, 03:35:13 PM

Is there anyone who has opened the muffler in an Intruder? (-79)
My started rattling inside so I thought to open it but do not know where I will be cutting  :-\

Title: Re: Muffler on Intruder
Post by: jimvw57 on March 05, 2013, 11:55:32 PM

I have had one or two with black walnuts inside, thanks to the local squirrels...

Title: Re: Muffler on Intruder
Post by: Habbeli on March 06, 2013, 09:15:59 AM

Hahahaaaaa .... that problem I do not have  ;D

Title: Re: Muffler on Intruder
Post by: Trucker on March 06, 2013, 04:39:03 PM

the cone could have come loose inside. I would carefully cut it open at the seems and thenweld it back together.

Title: Re: Muffler on Intruder
Post by: Habbeli on March 06, 2013, 06:17:57 PM

On my muffler there are two original welds, one at the back at the end and the other two inches ahead. Where do I cut???

Title: Re: Muffler on Intruder
Post by: Trucker on March 07, 2013, 03:03:46 PM

Quote from: Habbeli on March 06, 2013, 06:17:57 PM

On my muffler there are two original welds, one at the back at the end and the other two inches ahead. Where do I cut???

take you best guess and give it a shot. I have not done it myself but I would basically try to cut the top off in a way that it could be welded back on.

Title: Re: Muffler on Intruder
Post by: Habbeli on March 07, 2013, 05:05:47 PM

Well it is to cut where I believe are best  ???