KawasakiTrax Community
Tech Information => General Help => Topic started by: shizznats on August 26, 2013, 01:40:19 PM
-
Just a quick question for anyone who has a shop manual for the 1982 LTD. What is the stock driven clutch spring setting? The only shop manual available on kawasakitrax is the 1981 version and the primary clutch spring/ramps are different in there so I suspect the driven clutch setting may be different as well (its B-2 on the 1981 LTD). Thanks!
-
Hole #2
-
Thanks jskal; so it's hole 2 on the helix. Do you know what hole in the fixed sheave the other end of the spring goes in? There are three holes there... A, B, and C. Thanks!
-
B 2 is stock i preferred c1
-
cool, thanks!
-
So Trucker do you remember the difference in how it performed between the different settings? Joel
-
It didnt up shift as fast in the b2 setting and i like the c1 because it seemed to get a really nice upshift at about 45mph that would lay you back a bit,wife didnt like it so i put it back to stock setting.
-
Snapped a pic of the page - sorry I don't have a scanner @ home.
-
sweet, thanks guys!