KawasakiTrax Community

General Category => General Discussion => Topic started by: Liquifried on October 31, 2013, 03:55:35 PM

Title: LTD Carb Mikuni Conversion
Post by: Liquifried on October 31, 2013, 03:55:35 PM

Going through a 1981 LTD and the butterfly carbs are shot. Before I go and find used carbs, I was wondering if anyone has done a Mikuni conversion. If so, what size and what are the jetting specs. I have carbs left over from Invaders and Liquifires that I may try to rework.

Thanks!

Joe

Title: Re: LTD Carb Mikuni Conversion
Post by: kawhead on November 01, 2013, 12:13:34 PM

i used a set off an invader on my 82 ltd..... ended up with stock jetting after starting rich.. made a small bracket to make the oil cable work,440 invader cable also

Title: Re: LTD Carb Mikuni Conversion
Post by: Liquifried on November 01, 2013, 05:30:33 PM

Thanks!  I have a set of Mikuni's from a Liquifire that are in great condition. I may start there and tweak.

Title: Re: LTD Carb Mikuni Conversion
Post by: jskal on November 07, 2013, 07:40:54 PM

I have an available set of 36mm's from an Invader that are freshly cleaned and set to go. Let me know if interested.

Title: Re: LTD Carb Mikuni Conversion
Post by: invader87 on December 14, 2013, 08:15:49 AM

what mains did anyone end up using in a mik. ltd set up?

Title: Re: LTD Carb Mikuni Conversion
Post by: kawhead on December 14, 2013, 10:04:30 AM

i end up with stock invader set up after starting rich and working my way down