KawasakiTrax Community

Tech Information => General Help => Topic started by: whyz on February 27, 2014, 08:59:56 AM

Title: center bearing
Post by: whyz on February 27, 2014, 08:59:56 AM

I have a 80 ltd , is there a check valve in the case that feeds the center bearing? I tried blowing on line and nothing.  I did not want to use a air hose if there was.  The bearing looks and feels good.

Title: Re: center bearing
Post by: jimvw57 on February 27, 2014, 11:41:28 AM

The check valve is in the fitting that bolts to the case. Commonly called Banjo fittings, they are the same as the ones used on Polaris sleds (I think)

Putting compressed air through them can damage them.