KawasakiTrax Community

Tech Information => General Help => Topic started by: boot5 on March 07, 2014, 02:36:10 PM

Title: Secondary clutch Problems
Post by: boot5 on March 07, 2014, 02:36:10 PM

I'm new to the forum and I would like some information on how to put the secondary clutch back together on my basket case 1979 Invader 440.  Any information or breakdown would be appreciated.  Thanks boot5

Title: Re: Secondary clutch Problems
Post by: thomy on March 07, 2014, 04:52:55 PM

Get a friend to help hold the fixed sheave while you push the helix down and hold it just above the cam pads while turning the movable sheave to where you want it. Then push the helix down to hold the sheaves in place while your friend installs the circlip on the shaft.

Or, get the holder so you can do it yourself.

Thom

Title: Re: Secondary clutch Problems
Post by: boot5 on March 08, 2014, 09:59:05 AM

Thanks for the information but what about the arrows and holes for the spring?  all 3 pieces have a arrow and the hub have 1 and 2  and the other piece have a b and c. Where does the spring go?  Thanks boot5

Title: Re: Secondary clutch Problems
Post by: gixxer6 on March 08, 2014, 12:01:39 PM

The manual says B2 or C1

Title: Re: Secondary clutch Problems
Post by: thomy on March 08, 2014, 12:53:54 PM

Sorry, forgot to mention that all the arrows have to be in alignment.