KawasakiTrax Community

Tech Information => General Help => Topic started by: Tory944 on July 20, 2014, 07:29:29 PM

Title: Clutch Alignment Gauge/Bar Needed
Post by: Tory944 on July 20, 2014, 07:29:29 PM

  Anyone out there reproducing the clutch alignment gauge as seen in the Kawi manuals?  I've been using 3/8 bar stock and measuring the offset, but it sure would be nice to have the original "notched" bar.  If not, any trusting Kawi guys willing to let me "borrow" theirs if I cover shipping and a little extra for the trouble?  Thanks for any help.      Tory

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Interceptor398 on July 21, 2014, 09:04:28 AM

Which sled or clutch tool PN?

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Tory944 on July 21, 2014, 10:02:04 AM

   For the Interceptor...   but I would think the gauge is the same for the Invader?  Same center distance I would think?  Thanks...             T

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: kawhead on July 22, 2014, 08:35:51 AM

same gauge for all the k brand sleds....all but drifter/sst chassis

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Tory944 on July 22, 2014, 12:16:49 PM

...   still looking.....   Anyone??

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: DougKauer on July 22, 2014, 03:21:39 PM

Hi Tory, I got one from Interceptor398  (Bob) he was selling them for $40.00 plus what ever the cost was for shipping to your address.   Doug

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: gixxer6 on July 22, 2014, 05:38:21 PM

I got mine from Bob too. 

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Tory944 on July 22, 2014, 06:22:31 PM

That's great!  Hope he still has one...   will wait until he shows up again.  Thanks for the help guys...

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Interceptor398 on July 23, 2014, 10:32:39 AM

I sent you a PM

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Tory944 on July 23, 2014, 11:03:34 AM

Bob....   sent you a PM

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Dandb7 on July 23, 2014, 06:16:52 PM

Hi Bob,

Have you reduced the weight on the alignment bar......?

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Interceptor398 on July 24, 2014, 06:38:35 AM

Not yet, still trying to get to the Interceptor suspension shafts.

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Tory944 on July 24, 2014, 11:18:04 AM

Have you had a chance to figure shipping on the alignment bar??    Thanks.      Tory

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Interceptor398 on July 24, 2014, 09:34:45 PM

Have not been to town when the post office is open for a few days now but will be soon. ;)

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Tory944 on July 26, 2014, 06:14:43 AM

No rush...    no problem.  Thanks!

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Interceptor398 on July 26, 2014, 07:02:23 AM

Shipping is $13.00 to Maine.  Maybe should have just sent it so they don't come up with a higher number. If you use PayPal add 3 percent to the total.   398

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Tory944 on July 26, 2014, 10:32:14 AM

  I can send paypal payment "for a friend" so you don't get hit with Paypal fees.  Sound o.k? 

Title: Re: Clutch Alignment Gauge/Bar Needed
Post by: Interceptor398 on July 26, 2014, 01:15:45 PM

Sure.