KawasakiTrax Community

Tech Information => Tips and Tricks => Topic started by: bbap on December 31, 2016, 07:19:55 AM

Title: 1979 440 Drifter Clutch
Post by: bbap on December 31, 2016, 07:19:55 AM

Looking for any tips on the bolt size needed to remove my clutch using the "fill the void with grease/oil" method.  Markings on the clutch indicate:  John Deere, Comet Mod. 100 C-P. 

I found:
-9/16 fine 18 tpi, and
-3/4 fine 16 tpi

and now unsure...

Steve

Title: Re: 1979 440 Drifter Clutch
Post by: Interceptor398 on December 31, 2016, 09:01:55 AM

I know nothing about a John Deere clutch, but maybe someone else on here does.

Title: Re: 1979 440 Drifter Clutch
Post by: rminier on December 31, 2016, 09:10:23 AM

 I don't know about that clutch for sure, either.....but, the vast majority (not all) Comet's use the 3/4 inch  16 tpi.

Title: Re: 1979 440 Drifter Clutch
Post by: bbap on December 31, 2016, 09:58:11 AM

Thanks guys.  Next stop Lowes with the engine in a box.  Heavy bugger, hope their carts can take it!