KawasakiTrax Community

General Category => General Discussion => Topic started by: mswyka on January 23, 2022, 10:24:21 AM

Title: How to Make a LTD Windscreen
Post by: mswyka on January 23, 2022, 10:24:21 AM
I finally got around to finishing the video on how to make a LTD windscreen.  Here is the Youtube link:

https://youtu.be/C3hRPEKXhY8

It will probably make more sense if you watch the video that I made on how to make an Invader windscreen.  That video can be found at this link:

https://youtu.be/AvMuYraWFSs

While these videos are not terribly entertaining, it is my sincere hope that they will be helpful to some.

Feel free to ask questions. 

Title: Re: How to Make a LTD Windscreen
Post by: Interceptor398 on January 23, 2022, 11:03:54 AM
Well done!  I also like the cross cut saw on the wall.
Title: Re: How to Make a LTD Windscreen
Post by: Joel on January 24, 2022, 07:13:01 AM
Great job!
Title: Re: How to Make a LTD Windscreen
Post by: mswyka on January 25, 2022, 06:47:00 PM
Well done!  I also like the cross cut saw on the wall.

Thank you, and I promise there will be no videos on how to use a cross-cut saw.
Title: Re: How to Make a LTD Windscreen
Post by: mswyka on January 25, 2022, 06:47:41 PM
Great job!

Thank you, it has been quite a process to get the windscreens to be halfway decent.
Title: Re: How to Make a LTD Windscreen
Post by: Interceptor398 on January 25, 2022, 07:23:30 PM
Well done!  I also like the cross cut saw on the wall.

Thank you, and I promise there will be no videos on how to use a cross-cut saw.
 

I have a few of them.  Guess I like old relics and I have lost count of the old chainsaws I have, mostly yellow saws.  I have a 5 footer with a handle on one end that I used to build igloos when my girls were small.  Even talked the little lady into spending a night in one one time.  I used a snow blower to make snow piles and then used the saw to cut blocks after the piles hardened.  A pail of water and a -10 night and the igloo was rock solid.
Title: Re: How to Make a LTD Windscreen
Post by: mswyka on January 26, 2022, 06:46:45 AM
Well done!  I also like the cross cut saw on the wall.

Thank you, and I promise there will be no videos on how to use a cross-cut saw.
 

I have a few of them.  Guess I like old relics and I have lost count of the old chainsaws I have, mostly yellow saws.  I have a 5 footer with a handle on one end that I used to build igloos when my girls were small.  Even talked the little lady into spending a night in one one time.  I used a snow blower to make snow piles and then used the saw to cut blocks after the piles hardened.  A pail of water and a -10 night and the igloo was rock solid.

Sounds creative and great fun!
Title: Re: How to Make a LTD Windscreen
Post by: Interceptor398 on January 26, 2022, 08:18:40 AM
The igloo was always the only one in the area.