Author Topic: Invader ltd 4/6 motor  (Read 3669 times)

0 Members and 1 Guest are viewing this topic.

AdrenalineJunky

  • Newbie
  • *
  • Posts: 15
Invader ltd 4/6 motor
« on: August 17, 2013, 11:43:58 AM »
I have a complete 4/6 motor with oil pump and if my memory serves me right, the stator/mag assy.  no exh manifolds.  150 psi both side on snap-on gauge. Cyls look perfect through exh ports. I recall the seal looking good on the pto, but I would change them both anyway. Was taken from no spark sled that indicated less than 400 miles......I would have saved the sled but the cosmetics were broken up all around pretty bad.  I also have a decent pipe set w/manifolds.  Some other 4/5 parts too such as ski's, radiators, gauges, carbs, etc.  Price on motor; 400 miles, $400?

email; patroy1967@yahoo.com
« Last Edit: August 17, 2013, 11:46:37 AM by AdrenalineJunky »

Greg

  • Newbie
  • *
  • Posts: 9
Re: Invader ltd 4/6 motor
« Reply #1 on: April 07, 2014, 09:16:55 PM »
Any chance you still have the pipes and manifolds?

Jerry

  • Newbie
  • *
  • Posts: 2
Re: Invader ltd 4/6 motor
« Reply #2 on: August 09, 2014, 04:08:14 PM »
do you still have the ltd engine, Im looking for a 440 l/c that is in good shape.

Joel

  • Full Member
  • ***
  • Posts: 170
Re: Invader ltd 4/6 motor
« Reply #3 on: August 09, 2014, 06:13:41 PM »
How about skis and temp Guage? Joel
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519

AdrenalineJunky

  • Newbie
  • *
  • Posts: 15
Re: Invader ltd 4/6 motor
« Reply #4 on: November 28, 2014, 09:42:41 PM »
email me for the 4/6 stuff thanks.   patroy1967@yahoo.com