Hello guys new to this site new to kawis building a drag sled lookin for some jetting info I've got a 440 invader rebuilt with new seals and top end had porting done to the aeen specs also heads shaved running 38mm carbs with no box used aeens carb specs 360 mains 35 pilots have a couple different sets of twin pipes I've been tryin sled starts very hard and seems to be way to rich any thoughts would be great also when I originally rebuilt this engine the timing mark was off from the other spare engines I have am I correct that the timing mark is set at about 3 o'clock by the mark on the stator and the mark on the housing