Author Topic: How to Make a LTD Windscreen  (Read 1564 times)

0 Members and 1 Guest are viewing this topic.

mswyka

  • Hero Member
  • *****
  • Posts: 1791
How to Make a LTD Windscreen
« on: January 23, 2022, 10:24:21 AM »
I finally got around to finishing the video on how to make a LTD windscreen.  Here is the Youtube link:

https://youtu.be/C3hRPEKXhY8

It will probably make more sense if you watch the video that I made on how to make an Invader windscreen.  That video can be found at this link:

https://youtu.be/AvMuYraWFSs

While these videos are not terribly entertaining, it is my sincere hope that they will be helpful to some.

Feel free to ask questions. 

Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

Interceptor398

  • Administrator
  • Hero Member
  • *****
  • Posts: 2057
Re: How to Make a LTD Windscreen
« Reply #1 on: January 23, 2022, 11:03:54 AM »
Well done!  I also like the cross cut saw on the wall.

Joel

  • Full Member
  • ***
  • Posts: 170
Re: How to Make a LTD Windscreen
« Reply #2 on: January 24, 2022, 07:13:01 AM »
Great job!
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519

mswyka

  • Hero Member
  • *****
  • Posts: 1791
Re: How to Make a LTD Windscreen
« Reply #3 on: January 25, 2022, 06:47:00 PM »
Well done!  I also like the cross cut saw on the wall.

Thank you, and I promise there will be no videos on how to use a cross-cut saw.
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

mswyka

  • Hero Member
  • *****
  • Posts: 1791
Re: How to Make a LTD Windscreen
« Reply #4 on: January 25, 2022, 06:47:41 PM »
Great job!

Thank you, it has been quite a process to get the windscreens to be halfway decent.
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

Interceptor398

  • Administrator
  • Hero Member
  • *****
  • Posts: 2057
Re: How to Make a LTD Windscreen
« Reply #5 on: January 25, 2022, 07:23:30 PM »
Well done!  I also like the cross cut saw on the wall.

Thank you, and I promise there will be no videos on how to use a cross-cut saw.
 

I have a few of them.  Guess I like old relics and I have lost count of the old chainsaws I have, mostly yellow saws.  I have a 5 footer with a handle on one end that I used to build igloos when my girls were small.  Even talked the little lady into spending a night in one one time.  I used a snow blower to make snow piles and then used the saw to cut blocks after the piles hardened.  A pail of water and a -10 night and the igloo was rock solid.

mswyka

  • Hero Member
  • *****
  • Posts: 1791
Re: How to Make a LTD Windscreen
« Reply #6 on: January 26, 2022, 06:46:45 AM »
Well done!  I also like the cross cut saw on the wall.

Thank you, and I promise there will be no videos on how to use a cross-cut saw.
 

I have a few of them.  Guess I like old relics and I have lost count of the old chainsaws I have, mostly yellow saws.  I have a 5 footer with a handle on one end that I used to build igloos when my girls were small.  Even talked the little lady into spending a night in one one time.  I used a snow blower to make snow piles and then used the saw to cut blocks after the piles hardened.  A pail of water and a -10 night and the igloo was rock solid.

Sounds creative and great fun!
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

Interceptor398

  • Administrator
  • Hero Member
  • *****
  • Posts: 2057
Re: How to Make a LTD Windscreen
« Reply #7 on: January 26, 2022, 08:18:40 AM »
The igloo was always the only one in the area.