Author Topic: External Ignition Coil  (Read 4641 times)

0 Members and 1 Guest are viewing this topic.

mswyka

  • Hero Member
  • *****
  • Posts: 1792
External Ignition Coil
« on: December 22, 2021, 06:54:07 AM »
Good morning.  I am checking to see if anyone knows a source for new Intruder/Invader external ignition coils?

The coil on our pink sled was dead and I have gone searching through my usual sources and am either coming up with no listing or no stock. 

Are others seeing this same thing?
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

ArcticInvader

  • Newbie
  • *
  • Posts: 36
Re: External Ignition Coil
« Reply #1 on: December 23, 2021, 06:26:42 AM »
Hi Mark, I have lots of cars Mark if you need one
2010 Arctic Cat Z1 turbo
1996 ZRT  600
1996 ZRT 800
1995 Cougar 550
Projects : 3x 1980 LTD 4/6 all being restored
               2x 1978 Invader 440
                1x  1978 Invader 340

Lloyd (ljm)

  • Sr. Member
  • ****
  • Posts: 459
Re: External Ignition Coil
« Reply #2 on: December 23, 2021, 06:30:33 AM »

 Like many things during this pandemic they seem to be non existent.

  There are some options

 I know of a few that have successfully used a Polaris Indy CDI/Coil unit on these engines.
 
 
77 SST
78 Intruder
79 340 Invader
80 440 Invader
80 Drifter (bought new)
80 LTD 4/6    X2

Several Deeres

gixxer6

  • Hero Member
  • *****
  • Posts: 1566
Re: External Ignition Coil
« Reply #3 on: December 24, 2021, 10:46:43 AM »

 Like many things during this pandemic they seem to be non existent.

  There are some options

 I know of a few that have successfully used a Polaris Indy CDI/Coil unit on these engines.
 

I have a Polaris cdi that I will be installing on my Invader.  A reputable engine builder recommended it for a better timing curve.  It requires moving the stock stator plate significantly. 

Interceptor398

  • Administrator
  • Hero Member
  • *****
  • Posts: 2061
Re: External Ignition Coil
« Reply #4 on: December 25, 2021, 09:31:10 AM »
It will be interesting to hear how that works out.

Lloyd (ljm)

  • Sr. Member
  • ****
  • Posts: 459
Re: External Ignition Coil
« Reply #5 on: December 25, 2021, 10:43:54 AM »


 A Polaris CDI unit gives a similar timing curve to a 82-84 Liquifire or a 4/6.
77 SST
78 Intruder
79 340 Invader
80 440 Invader
80 Drifter (bought new)
80 LTD 4/6    X2

Several Deeres

gixxer6

  • Hero Member
  • *****
  • Posts: 1566
Re: External Ignition Coil
« Reply #6 on: December 26, 2021, 08:32:51 AM »
It will be interesting to hear how that works out.

He built a standard Invader motor with Polaris CDI, custom heads, porting, and 4/6 pipes that ran mid 80s HP on the dyno with a nice broad power curve. 

gixxer6

  • Hero Member
  • *****
  • Posts: 1566
Re: External Ignition Coil
« Reply #7 on: December 26, 2021, 08:35:18 AM »


 A Polaris CDI unit gives a similar timing curve to a 82-84 Liquifire or a 4/6.

Yeah, should be similar to the Liquifire, but the 4/6 uses an older cdi similar to the old arctic cat.  Many swap them out for Invader heads and ignition for an improvement. 

mswyka

  • Hero Member
  • *****
  • Posts: 1792
Re: External Ignition Coil
« Reply #8 on: February 22, 2022, 09:37:34 AM »
I now have an external ignition coil on "backorder."  I am told that delivery will be in March.  We will see how that works out.
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

gixxer6

  • Hero Member
  • *****
  • Posts: 1566
Re: External Ignition Coil
« Reply #9 on: February 22, 2022, 01:18:36 PM »
I now have an external ignition coil on "backorder."  I am told that delivery will be in March.  We will see how that works out.

I'm sure I have a good used coil if you need one. 

mswyka

  • Hero Member
  • *****
  • Posts: 1792
Re: External Ignition Coil
« Reply #10 on: July 22, 2022, 06:28:11 PM »
Coils finally arrived!
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440

Interceptor398

  • Administrator
  • Hero Member
  • *****
  • Posts: 2061
Re: External Ignition Coil
« Reply #11 on: July 23, 2022, 03:43:03 PM »
That took a while!

sprocket

  • Sr. Member
  • ****
  • Posts: 274
Re: External Ignition Coil
« Reply #12 on: July 23, 2022, 09:51:23 PM »
I think some of the 2 stroke Kawasaki motorcycles used these coils to

mswyka

  • Hero Member
  • *****
  • Posts: 1792
Re: External Ignition Coil
« Reply #13 on: July 24, 2022, 07:38:44 PM »
That took a while!

Better late than never.
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440