Author Topic: My ltd resto/rebuild  (Read 4777 times)

0 Members and 1 Guest are viewing this topic.

sappony

  • Newbie
  • *
  • Posts: 15
My ltd resto/rebuild
« on: November 06, 2012, 04:26:45 PM »
I'm finally going completly over my ltd it has 600 miles on it. It took me forever to pry it from the original owner  ;D. Ill be looking for help locating parts seals gaskets ect. How do i post pics here. Can i post pics from my phone to here , android o/s. If you guys have any hot tips they will be greatly appreciated.

ChaChi

  • Full Member
  • ***
  • Posts: 123
Re: My ltd resto/rebuild
« Reply #1 on: November 06, 2012, 05:11:59 PM »
A lot of places locally stopped showing some of the vintage winderosa gaskets the last few years... They do in fact still make them tho, it's just places cutting down their listings...

Looks to have lots
http://www.psep.biz/store/kawasaki_snowmobile_parts.htm

This place offers the basics still but anywhere that has winderosa gaskets should be able to get you a full set or top end set!
http://www.mfgsupply.com/garage/vehicleparts/parts/snowmobile/kawasaki/1981/ltd+440-m/

Image enterprises has been awesome at getting me the hardest to find things!
« Last Edit: November 07, 2012, 06:50:23 AM by ChaChi »

sappony

  • Newbie
  • *
  • Posts: 15
Re: My ltd resto/rebuild
« Reply #2 on: November 06, 2012, 08:58:56 PM »
heres another site i found,http://www.psep.biz/store/kawasaki_snowmobile_parts.htm

ChaChi

  • Full Member
  • ***
  • Posts: 123
Re: My ltd resto/rebuild
« Reply #3 on: November 07, 2012, 06:49:36 AM »
I will be using the one you found and will change my link to it to support it!

I have been looking for that website since last year when I browsed acrossed it... Thanks!

sappony

  • Newbie
  • *
  • Posts: 15
Re: My ltd resto/rebuild
« Reply #4 on: November 08, 2012, 05:23:19 PM »
OK totally have my motor apart, I'm glad i did it now. I am going to need a mag side crank bearing, who carries that? besides the standard gaskets and seals. Everything else looks ok all tolerances are within spec. I'm also having a seat cover shipped so if she needs to stich the top pattern to the sides my friend has a prototype to start with.

gixxer6

  • Hero Member
  • *****
  • Posts: 1565
Re: My ltd resto/rebuild
« Reply #5 on: November 09, 2012, 08:23:07 AM »
When I needed a crank bearing for one of my Invader motors, I took the old one in to my local NAPA autoparts store and they matched it up based on the numbers on the bearing.  If that doesn't work, Jerome at Crankshaft Services can get them...

sappony

  • Newbie
  • *
  • Posts: 15
Re: My ltd resto/rebuild crank bearings n seals
« Reply #6 on: November 10, 2012, 12:15:53 PM »
awesome,, my buddy also informed me that an old buisness i thought closed is still open and he gets stuff there all the time. http://www.yellowpages.com/pottstown-pa/mip/philadelphia-ball-roller-inc-9899437 the prices should be reasonable to.

Joel

  • Full Member
  • ***
  • Posts: 170
Re: My ltd resto/rebuild
« Reply #7 on: November 11, 2012, 04:44:12 AM »
I am also in the the process of sourcing parts for the LTD's. I found that Parts Reloaded.com also has alot of listings of parts for the LTD. Joel
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519