Vintage Kawasaki snowmobile community - keeping the legend alive!
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome to KawasakiTrax.com Online Community
KawasakiTrax Community
»
General Category
»
General Discussion
»
Which 440 fan motors have the same jugs and bottom end as the intruder?
« previous
next »
Print
Pages: [
1
]
Author
Topic: Which 440 fan motors have the same jugs and bottom end as the intruder? (Read 2778 times)
0 Members and 1 Guest are viewing this topic.
rogers26
Newbie
Posts: 9
Which 440 fan motors have the same jugs and bottom end as the intruder?
«
on:
November 21, 2017, 07:07:50 PM »
Thanks for the add! I have a intruder and was wondering if the drifter 440 is the same motor
«
Last Edit: November 22, 2017, 06:36:07 AM by rogers26
»
Logged
Interceptor398
Administrator
Hero Member
Posts: 2070
Re: Fan motors
«
Reply #1 on:
November 21, 2017, 07:42:29 PM »
Welcome to the site!!! They have some things in common but for the most part are not the same.
Logged
rogers26
Newbie
Posts: 9
Re: Fan motors
«
Reply #2 on:
November 22, 2017, 03:35:52 AM »
Really want to build a couple fan motors for oval racing and need to know if the crank , jugs and heads are the same? intruder, drifter, or other models
«
Last Edit: November 22, 2017, 06:31:29 AM by rogers26
»
Logged
Interceptor398
Administrator
Hero Member
Posts: 2070
Re: Which 440 fan motors have the same jugs and bottom end as the intruder?
«
Reply #3 on:
November 22, 2017, 01:38:17 PM »
Intruder jugs are set up for twin carbs and the jugs can be on either side. Drifter jugs are set up for 1 carb and the cylinders are only left or right. I've never tried it but the bottom ends may work for both.
Logged
rogers26
Newbie
Posts: 9
Re: Which 440 fan motors have the same jugs and bottom end as the intruder?
«
Reply #4 on:
November 23, 2017, 04:27:14 AM »
398. Thanks I am new with kawasaki but ready two learn
Logged
Lloyd (ljm)
Sr. Member
Posts: 459
Re: Which 440 fan motors have the same jugs and bottom end as the intruder?
«
Reply #5 on:
November 28, 2017, 04:05:23 AM »
Intruder jugs will fit just fine on a Drifter bottom end.
Any of the T7 engines can swap jugs.
Logged
77 SST
78 Intruder
79 340 Invader
80 440 Invader
80 Drifter (bought new)
80 LTD 4/6 X2
Several Deeres
Print
Pages: [
1
]
« previous
next »
KawasakiTrax Community
»
General Category
»
General Discussion
»
Which 440 fan motors have the same jugs and bottom end as the intruder?