« previous next »
Pages: [1]

Author Topic: Bulk heads  (Read 1818 times)

0 Members and 1 Guest are viewing this topic.

sprocket

  • Sr. Member
  • ****
  • Posts: 274
Bulk heads
« on: December 26, 2015, 02:55:11 PM »
Is there much difference on the bulk heads from Invader to Interceptor minus bracket tree ?
Logged

sprocket

  • Sr. Member
  • ****
  • Posts: 274
Re: Bulk heads
« Reply #1 on: December 26, 2015, 02:56:38 PM »
Width spindle to spindle & where the engine sits in the chassis
Logged

Joel

  • Full Member
  • ***
  • Posts: 170
Re: Bulk heads
« Reply #2 on: December 26, 2015, 03:07:16 PM »
I will go and do some measuring. Going from memory spindle to spindle is 3" wider on Interceptor but I think inner bulk head is the same.
Logged
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519

mswyka

  • Hero Member
  • *****
  • Posts: 1796
Re: Bulk heads
« Reply #3 on: December 26, 2015, 06:01:18 PM »
Depending upon the year, the engine mounts will be different.  The Interceptor should be the same as the 81/82 LTD.  The mounts for the other year Invaders will be slightly different.  We went through the process of converting a 81 LTD to accept a 1979 engine.  While not particularly difficult, i don't plan to do that again.
Logged
Intruders:  1978, 1979, 1981 Custom (Pink)
Invaders:   1980 440
Projects:    1981 Invader 440
Pages: [1]
« previous next »