« previous next »
Pages: [1]

Author Topic: what kit do i need for intruder carbs?  (Read 4513 times)

0 Members and 1 Guest are viewing this topic.

heiner921

  • Jr. Member
  • **
  • Posts: 81
what kit do i need for intruder carbs?
« on: October 15, 2014, 04:57:49 PM »
so I know I have vm32 carbs..... are they zinc or aluminum..... from what I found mikuni made both and they have different rebuild kits.... which one do I need?     I need new float bowl gaskets and new O-rings for the power jet thanks in advance
« Last Edit: October 15, 2014, 05:41:53 PM by heiner921 »
Logged

Lloyd (ljm)

  • Sr. Member
  • ****
  • Posts: 459
Re: what kit do i need for intruder carbs?
« Reply #1 on: October 16, 2014, 05:45:59 AM »


 Matt at newbreedparts.com will be able to get you gaskets and o-rings. My experience with kits is they have parts you don't need and don't have parts you do need. Best to buy the parts you need
Logged
77 SST
78 Intruder
79 340 Invader
80 440 Invader
80 Drifter (bought new)
80 LTD 4/6    X2

Several Deeres

heiner921

  • Jr. Member
  • **
  • Posts: 81
Re: what kit do i need for intruder carbs?
« Reply #2 on: October 16, 2014, 12:16:55 PM »
I actually found the original at my local auto parts store but I'll look to the site for the gasket
Logged

JDmatt

  • Full Member
  • ***
  • Posts: 131
Re: what kit do i need for intruder carbs?
« Reply #3 on: October 16, 2014, 08:51:37 PM »
I have to admit I am not familiar with the VM32 on Kawi's but is it safe to assume it uses the same body as the standard VM34?  If so, this is the gasket:
http://www.newbreedparts.com/newbreed/index.php?route=product/product&path=59_63_107&product_id=214
Logged
Matt
www.JDsleds.com - John Deere Snowmobiles
www.newbreedparts.com - New parts for John Deere & Kawasaki Snowmobiles
Pages: [1]
« previous next »