« previous next »
Pages: [1]

Author Topic: 1979 Drifter parts  (Read 3004 times)

0 Members and 2 Guests are viewing this topic.

Joel

  • Full Member
  • ***
  • Posts: 170
1979 Drifter parts
« on: November 06, 2014, 08:43:05 PM »
Hello, was curious if anybody has a chain case cover gasket #050909. Also needing the plastic spindle bushings(4) #090722. I have tried the 1981 drifter spindle  bushings but they are a different size. Any help would be appreciated. Thank you Joel
Logged
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519

dr1979-340

  • Full Member
  • ***
  • Posts: 145
Re: 1979 Drifter parts
« Reply #1 on: November 07, 2014, 04:41:45 PM »
I've found if I use the 1980 Drifter parts manual numbers for searching I've had better luck.  They used a lot of the same parts on the 1980.  92055-3505 is from the 1980 Drifter parts manual.  The 050909 is a Sno-Jet number that Kawasaki used in the 1979 parts manual.  I bought one off Ebay a couple months ago.  Here is a link:

http://www.ebay.com/itm/like/151323911852?item=151323911852&ttle=Kawasaki+Drifter+Chain+Case+O-ring+New+Old+Stock+92055-3505+Genuine+Kawasaki&vectorid=229466&tc=US
« Last Edit: November 07, 2014, 04:48:10 PM by dr1979-340 »
Logged
Two 1979 340 Drifters
1979 440 Drifter
1980 440 Drifter

Joel

  • Full Member
  • ***
  • Posts: 170
Re: 1979 Drifter parts
« Reply #2 on: November 07, 2014, 06:09:12 PM »
Thanks ,I did find a gasket in my stash after looking at the updated parts #. But still looking for the spindle bushings #92028-3518 if anyone has any. Thank you Joel
Logged
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519

Interceptor398

  • Administrator
  • Hero Member
  • *****
  • Posts: 2061
Re: 1979 Drifter parts
« Reply #3 on: November 08, 2014, 08:49:10 AM »
The spindle bushings are meant to have a little play in them.  How bad are yours?
Logged

Joel

  • Full Member
  • ***
  • Posts: 170
Re: 1979 Drifter parts
« Reply #4 on: November 09, 2014, 05:36:49 PM »
I have one broken one, so I figured I would replace them all. I did find some , now just need them shipped. Joel
Logged
79 Drifter 440, 79 Invader 440,82 Intruder,81 LTD, 82 LTD x2, 82 GT Prototype,82 Interceptor #519

dr1979-340

  • Full Member
  • ***
  • Posts: 145
Re: 1979 Drifter parts
« Reply #5 on: September 17, 2015, 10:42:58 AM »
Joel, where did you find the spindle bushings?  I'm in need of two of them for my 1979 340 Drifter.
Logged
Two 1979 340 Drifters
1979 440 Drifter
1980 440 Drifter
Pages: [1]
« previous next »