« previous next »
Pages: [1] 2

Author Topic: Intruder Silenser  (Read 16009 times)

0 Members and 1 Guest are viewing this topic.

Habbeli

  • Full Member
  • ***
  • Posts: 146
Intruder Silenser
« on: March 14, 2015, 06:28:21 PM »
Is there any markings on the silencers so I know what I have on my Intruder?
I have two with small differences  :P
Logged
Where does the white go when the snow melts :-))

Habbeli

  • Full Member
  • ***
  • Posts: 146
Re: Intruder Silenser
« Reply #1 on: October 27, 2015, 07:23:48 PM »
Anyone who knows  :-\
Logged
Where does the white go when the snow melts :-))

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: Intruder Silenser
« Reply #2 on: October 28, 2015, 06:45:45 AM »
What are the differences?  Pictures? 
Logged

Habbeli

  • Full Member
  • ***
  • Posts: 146
Re: Intruder Silenser
« Reply #3 on: October 28, 2015, 01:08:57 PM »
I do not have them at home now so I can photograph them  :-\
Are they labeled with part numbers?
Logged
Where does the white go when the snow melts :-))

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: Intruder Silenser
« Reply #4 on: October 28, 2015, 02:57:53 PM »
They are not marked with part numbers. 

I'm not sure about the Intruders, but I know that the 80' & 81' Invaders had a different pipe than the 78' & 79' Invaders.  the newer version is larger and has an extra chamber before the tail pipe.  Where as the earlier pipe is smaller and has a longer tail pipe. 
Logged

Habbeli

  • Full Member
  • ***
  • Posts: 146
Re: Intruder Silenser
« Reply #5 on: October 30, 2015, 11:27:11 AM »
How in the world shall I know if I have the right muffler on my Intruder  :-\  :-\  :-\
Logged
Where does the white go when the snow melts :-))

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: Intruder Silenser
« Reply #6 on: October 31, 2015, 11:56:54 AM »
Post pictures. 
Logged

Habbeli

  • Full Member
  • ***
  • Posts: 146
Re: Intruder Silenser
« Reply #7 on: November 03, 2015, 01:45:35 PM »
This is how the silencer looks out that I have mounted at the moment.
I have one more but I can not take the picture right now







Logged
Where does the white go when the snow melts :-))

Interceptor398

  • Administrator
  • Hero Member
  • *****
  • Posts: 2109
Re: Intruder Silenser
« Reply #8 on: November 03, 2015, 02:53:43 PM »
Nice sled,  the muffler looks like it was meant for that spot.  I'd run it.
Logged

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: Intruder Silenser
« Reply #9 on: November 04, 2015, 06:46:53 AM »
 VERY nice sled!  Looks like a 78-79 version pipe. 

That chain case cover looks familiar.  ;)
Logged

Dandb7

  • Sr. Member
  • ****
  • Posts: 293
Re: Intruder Silenser
« Reply #10 on: November 04, 2015, 06:56:30 AM »
Nice clean sled....well done !
Logged
1982 Kawasaki Interceptor 550 #558
1979 Kawasaki Drifter 440
1989 Arctic Cat Pantera 440
2012 Arctic Cat F1100 Turbo 50th Anniversary 2015 Arctic Cat Lynx 2000

rminier

  • Hero Member
  • *****
  • Posts: 507
Re: Intruder Silenser
« Reply #11 on: November 04, 2015, 02:42:21 PM »
 I have the pipe out of my 79 Invader 440 for some fresh paint..and your pipe sure looks identical to mine.
 I don't own an Intruder, but I know they used a pipe with a different part #.
 With the Intruder having a power peak roughly 1000 RPMs lower than the Invader, I would have thought there would be some visible differences in the length of the various sections of the pipes.
 Anyone on here have any pictures of the Intruder pipe?
Logged
75 SnoJet Astro SS, 79 Kawasaki Invader 440 (two of them), 81 Scorpion Sidewinder, 82 Blizzard 9500, 83 Yamaha Vmax 540, 97 MXZ 670....and holding...for now.

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: Intruder Silenser
« Reply #12 on: November 04, 2015, 02:50:54 PM »
These pipes are a pipe and silencer built into one.  Inside of the pipe is a divergent cone (I think this is what they are called), I believe that some of the tuning of the pipe is dictated by where the cone is located inside of the pipe.  It's possible that they look identical on the outside, but have the cone in a different location on the inside.  The easier way is to find the parts books and compare the part numbers. 
Logged

rminier

  • Hero Member
  • *****
  • Posts: 507
Re: Intruder Silenser
« Reply #13 on: November 04, 2015, 02:58:09 PM »
 Yep, they may look identical, externally. I know the exhaust y-pipe has the part # stamped into it. Does the tuned pipe? I sure don't remember ever seeing anything stamped in mine.
 It may be tough for Habbeli to ever know for sure. ???
Logged
75 SnoJet Astro SS, 79 Kawasaki Invader 440 (two of them), 81 Scorpion Sidewinder, 82 Blizzard 9500, 83 Yamaha Vmax 540, 97 MXZ 670....and holding...for now.

rminier

  • Hero Member
  • *****
  • Posts: 507
Re: Intruder Silenser
« Reply #14 on: November 04, 2015, 03:18:57 PM »
 I found the part # stamped in my pipe. Habbeli, if you can still see the numbers on your pipes, we can tell you exactly what you have. 8)
  78-79-80 Intruders used pipe 39083-3502.
 81 Intruder used 39083-3513.
 Don't have info for the 82, but I would guess it used 3513, also.
« Last Edit: November 04, 2015, 06:08:53 PM by rminier »
Logged
75 SnoJet Astro SS, 79 Kawasaki Invader 440 (two of them), 81 Scorpion Sidewinder, 82 Blizzard 9500, 83 Yamaha Vmax 540, 97 MXZ 670....and holding...for now.
Pages: [1] 2
« previous next »