« previous next »
Pages: [1]

Author Topic: 81 440 invader track  (Read 18920 times)

0 Members and 1 Guest are viewing this topic.

NDHICK

  • Newbie
  • *
  • Posts: 10
81 440 invader track
« on: October 11, 2013, 05:29:10 AM »
Does anyone knoe the length, width, and angle of the track for these sleds? I am looking to replace mine and can't sem to find the specs on it anywhere.
Logged

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: 81 440 invader track
« Reply #1 on: October 11, 2013, 11:46:03 AM »
121"x15", 2.52 pitch.  Internal drive.  Most newer tracks will fit, but the newer tracks have extra internal drive lugs, so the idler wheels on the skid and drive axle would need to be spaced to clear them. 

If you're looking for a stock replacement, I have a few real nice tracks off from Invaders that I would sell for relatively cheap. 
Logged

NDHICK

  • Newbie
  • *
  • Posts: 10
Re: 81 440 invader track
« Reply #2 on: October 11, 2013, 05:13:46 PM »
Thanks for your help I have a local guy that has a 121 with 1 inch lugs on it I am going to see if this will work. Not many groomed trails around here and need the longer lugs.
Logged

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: 81 440 invader track
« Reply #3 on: October 12, 2013, 02:48:29 PM »
I put a 1" camoplast hacksaw track on my 81 440 Invader, by far the BEST mod I have done.  Well worth the extra effort!  Good luck! 
Logged

jimvw57

  • Hero Member
  • *****
  • Posts: 624
Re: 81 440 invader track
« Reply #4 on: October 12, 2013, 11:33:56 PM »
I think the 1" lugs will hit the tunnel up front. Can't say for sure but I think I heard that you should stay around .75
Logged

Lloyd (ljm)

  • Sr. Member
  • ****
  • Posts: 459
Re: 81 440 invader track
« Reply #5 on: October 13, 2013, 05:42:00 AM »
Gixxer6

  did you have enough clearance for a 1 inch lug?
Logged
77 SST
78 Intruder
79 340 Invader
80 440 Invader
80 Drifter (bought new)
80 LTD 4/6    X2

Several Deeres

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: 81 440 invader track
« Reply #6 on: October 13, 2013, 06:54:10 AM »
I've got almost 1,000 miles on the 1" track with no issues. 
Logged

79Intruder

  • Newbie
  • *
  • Posts: 41
  • Stripping down 79 Intruder
Re: 81 440 invader track
« Reply #7 on: October 13, 2013, 09:23:16 AM »
Glad to hear about the info on the tracks. I also have a track I just took off my 79 Intruder, If anyone is interested in it. Really cheep.
Logged

Habbeli

  • Full Member
  • ***
  • Posts: 146
Re: 81 440 invader track
« Reply #8 on: October 13, 2013, 02:56:19 PM »
I have 1,25" ( 32mm )  on my Intruder, no problems
Logged
Where does the white go when the snow melts :-))

Lloyd (ljm)

  • Sr. Member
  • ****
  • Posts: 459
Re: 81 440 invader track
« Reply #9 on: October 14, 2013, 05:54:07 AM »


 Anyone running a track deeper than 1.25" ?

Logged
77 SST
78 Intruder
79 340 Invader
80 440 Invader
80 Drifter (bought new)
80 LTD 4/6    X2

Several Deeres

booblover

  • Newbie
  • *
  • Posts: 40
Re: 81 440 invader track
« Reply #10 on: November 20, 2013, 03:47:41 PM »
I have a parts sled that I was going to take the skid out of to rebuild for my good sled. I can get a 1" track for cheap money, but it is picked out. Are picks a bad idea on a 1" track?
Logged

booblover

  • Newbie
  • *
  • Posts: 40
Re: 81 440 invader track
« Reply #11 on: November 20, 2013, 03:49:31 PM »
Sorry, that 1" track is going on an 81 invader
Logged

gixxer6

  • Hero Member
  • *****
  • Posts: 1578
Re: 81 440 invader track
« Reply #12 on: November 20, 2013, 05:58:40 PM »
Make sure the studs aren't too long.  You will need tunnel protectors . 
Logged
Pages: [1]
« previous next »