« previous next »
Pages: [1]

Author Topic: center bearing  (Read 6367 times)

0 Members and 1 Guest are viewing this topic.

whyz

  • Newbie
  • *
  • Posts: 3
center bearing
« on: February 27, 2014, 08:59:56 AM »
I have a 80 ltd , is there a check valve in the case that feeds the center bearing? I tried blowing on line and nothing.  I did not want to use a air hose if there was.  The bearing looks and feels good.
Logged

jimvw57

  • Hero Member
  • *****
  • Posts: 624
Re: center bearing
« Reply #1 on: February 27, 2014, 11:41:28 AM »
The check valve is in the fitting that bolts to the case. Commonly called Banjo fittings, they are the same as the ones used on Polaris sleds (I think)

Putting compressed air through them can damage them.
Logged
Pages: [1]
« previous next »