I've looked high and low for this info, and I can't seem to find a thread anywhere (let me know if I'm wrong). I have the sled all back together and it does start and run, not well, way to rich but thats a different problem. However, I have no lights, rpm signal or power to any thing on the dash. I have traced the wires that I changed and it matches a wiring diagram. I tested the two yellow wires coming out of the engine for ac voltage and its there. I am on my 3rd voltage regulator (2 used and 1 new) does anyone know what could be going on? Im about to go back out and figure out how far the voltage from the engine gets, but it seemed like it stopped at the regulator. Also, does anyone have some numbers to look for with resistance values or voltage numbers to expect. Thankyou in advance anything helps