Author Topic: Parts interchange  (Read 11044 times)

0 Members and 1 Guest are viewing this topic.

Trucker

  • Full Member
  • ***
  • Posts: 171
Parts interchange
« on: October 15, 2012, 03:52:19 PM »
    Parts Interchange
      

   
I know somebody was asking about part number interchange in another thread so I thought I'd start a thread on it. If you know of any other part numbers that interchange between Kawi/Cat/and JD please add to the list.

Center Seal O Rings: Kawasaki pn# 92055-3002, Arctic Cat pn# 3001-437
32mm Carb Flange: Kawasaki pn# 16065-3008, Arctic Cat pn# 0115-544
36mm Carb Flange: Kawasaki pn# 16065-3007, Arctic Cat pn# 0670-197
Chain Tensioner Pads: Kawasaki pn# 12053-3501, Arctic Cat pn# 0170-228
Econo Carb Needle Jet Retainer: Kawasaki pn# 16065-008, Arctic Cat pn# 6505-044
Carb O ring: Kawasaki pn # 92055-044, Arctic Cat pn# 6505-042, John Deere pn# R34812 (supposedly cheaper than Cat), McMaster-Carr pn# 9464k12 $4.62 for pack of 100

While not Kawi/Cat/JD these are other parts that interchange with Kawasaki:

Oil system Banjo: Same as Banjo for the 86 Polaris Indy 400. Polaris Part # 3083894

Renumbered Kawasaki Parts that are still available from a dealer:

Pin 6.5x10x38 old pn# 920243-3001, new pn# 92043-1370
Bushing 40x44x12 old pn# 92028-3008, new pn# 92028-1511
Spacer 10x16x.8 old pn# 92026-3001, new pn# 92026-1304
Nut, special lock 6mm pn# 92019-008, still available under same part number
Roller old pn# 92122-3001, new pn# 92122-1152
Washer, spider old pn# 92022-3016, new pn# 92022-1899
Bolt, flanged 6x20 old pn# 92001-3001, new pn# 92150-1014
Bushing 32x36x20 old pn# 92028-3005, new pn# 92028-1513
Bushing 25x28x30 old pn# 92028-3004, new pn# 92028-1514
Bushing 50x55x20 old pn# 92028-3006, new pn# 92028-1512
Washer Split old pn# 92022-3001, new pn# 92022-1897
Washer, special conical old pn# 92022-3015, new pn# 92022-1901
Guide, Wear (plastic clutch guides 79-82) old pn# 13070-3002 new pn# 13070-1185

Red and Amber Side Reflectors Stratolite 3-1/8" x 1-1/2" Black ABS bezel #99BZ
http://www.stratolite.com/mcart/index.cgi?code=3&cat=2

This post has been edited by Invader 440: Jan 11 2011, 03:19 PM


--------------------
Ex KAWISnCATS
Go to the top of the pageReport Post
   
 
Edit Post+Quote Post
Invader 440
   
post Dec 20 2008, 02:07 PM
IP: 208.38.94.178 | Post #2 |


Interceptor
*******

Group: Forum member
Posts: 1406
Joined: 19-December 04
From: Fosston, Mn
Member No.: 79

Rating: -< 0 ( 0 ) 5 >+

   
Added some more numbers today. Found out some of the drive and driven clutch parts are still available and are used on ATV clutches..


--------------------
Ex KAWISnCATS
Go to the top of the pageReport Post
   
 
Delete PostEdit Post+Quote Post
timmcat
   
post Feb 14 2009, 05:06 PM
IP: 65.202.140.163 | Post #3 |


Invader
*****

Group: Forum member
Posts: 208
Joined: 9-September 06
Member No.: 448

Rating: -< 0 ( ) 5 >+

   


Kawi PN:16065-3010
carb flanges from mikuni (genuine) for invader 440
PN: vm38200
also 074701 kimpex or lemans

Kawi PN:16065-3008
invader 340, 78-79 intruder, intriguer, drifter340-440
PN: vm32205
also 071013 kimpex or lemans

Kawi PN:54005-3502
fits all brake cable
PN: 0513839 kimpex
Go to the top of the pageReport Post
   
 
Delete PostEdit Post+Quote Post
ari648
   
post Nov 10 2009, 11:25 AM
IP: 208.218.238.20 | Post #4 |


Intruder
****


   
Starter brushes for the Hitachi S108-34 starter, available from Arctic Cat.

AC 0145-071 Positive brush
AC 0145-072 Negative brush

Link to the AC parts diagram

http://www.brownsleisureworld.com/link.cgi...STARTMOTOR.html

gixxer6
   



   
Replacement Kawasaki Primary clutch ramp bushings. www.mcmaster.com part number: 6679K15


--------------------
"WARNING: THIS IS A HIGH PERFORMANCE SNOWMOBILE AND SHOULD NOT BE OPERATED BY A NOVICE OR INEXPERIENCED OPERATOR."

Invader 440
   


Interceptor
*******


Added a carb o ring part number for John Deere. Suppose to be cheap dollar wise.


--------------------
Ex KAWISnCATS

 
Invader 440
   


Interceptor
*******

Rating: -< 0 ( 0 ) 5 >+

   
Added the new Kawasaki part number for the 79-82 plastic clutch wear guides.


--------------------
Ex KAWISnCATS

   
The oil check valve gaskets used on 81-82 LTDs and Interceptors, P/N: 11009-3028, are still available through your local Kawi dealership...


--------------------
"WARNING: THIS IS A HIGH PERFORMANCE SNOWMOBILE AND SHOULD NOT BE OPERATED BY A NOVICE OR INEXPERIENCED OPERATOR."
Go to the top of the pageReport Post
   
 
Habbeli
   

QUOTE (KAWISnCATS @ Dec 20 2008, 02:07 PM) *
Added some more numbers today. Found out some of the drive and driven clutch parts are still available and are used on ATV clutches..

Which ATV?
Go to the top of the pageReport Post
   
 
QUOTE (Habbeli @ Jan 22 2012, 04:37 PM) *
QUOTE (KAWISnCATS @ Dec 20 2008, 02:07 PM) *
Added some more numbers today. Found out some of the drive and driven clutch parts are still available and are used on ATV clutches..

Which ATV?


The following mules:
KAF540- C1, D1, E1
KAF620- A1, A2, A3, A4, A5
KAF620- B1, B2, B3, B4
« Last Edit: January 28, 2016, 02:54:02 PM by Interceptor398 »

Habbeli

  • Full Member
  • ***
  • Posts: 145
Re: Parts interchange
« Reply #1 on: December 02, 2012, 11:33:48 AM »
What is the difference between
49048-1054 and 49048-1057?
Where does the white go when the snow melts :-))

Trucker

  • Full Member
  • ***
  • Posts: 171
Re: Parts interchange
« Reply #2 on: January 26, 2013, 11:24:54 AM »
This should come in handy for you guys! parts interchange for Kawasaki and John Deere part numbers

Habbeli

  • Full Member
  • ***
  • Posts: 145
Re: Parts interchange
« Reply #3 on: November 17, 2013, 01:51:47 PM »
What is the difference between
49048-1054 and 49048-1057?

Is there any difference at all  ???
Where does the white go when the snow melts :-))

Trucker

  • Full Member
  • ***
  • Posts: 171
Re: Parts interchange
« Reply #4 on: November 22, 2013, 07:06:31 PM »
What is the difference between
49048-1054 and 49048-1057?

Is there any difference at all  ???
Not sure on that since i havent seen them myself

Habbeli

  • Full Member
  • ***
  • Posts: 145
Re: Parts interchange
« Reply #5 on: November 26, 2013, 08:37:35 AM »
Okay  :-[
Where does the white go when the snow melts :-))

sprocket

  • Full Member
  • ***
  • Posts: 231
Re: Parts interchange
« Reply #6 on: January 16, 2014, 08:41:43 AM »
On the 4/6 engine the pulsar coil & the exciter coil cross reference to a 1989 Kawasaki 550 jet ski (stand up model) the other is a Arctic Cat 1974 el tiger 440 T7 Kawasaki engine sorry I don't have the part numbers

Invader440

  • Jr. Member
  • **
  • Posts: 65
  • Up Norte Dere in Fosston, Mn
    • Curt's Snowmobiling Page
Re: Parts interchange
« Reply #7 on: January 04, 2015, 10:01:01 PM »
Arctic Cat tensioner pad should be  pn# 0107-228 vs 0170-228

Boomologist

  • Administrator
  • Full Member
  • *****
  • Posts: 116
Re: Parts interchange
« Reply #8 on: January 17, 2015, 06:53:09 PM »
For 550 owners:
Should you have a failure in the magneto system, the mag system from the 440 Invader will work provided the entire system is replaced. Flywheel, mag coils, etc.
I had to resort to this when I discovered that the previous owner had sat the flywheel on his bench and the magnets collected some small nuts & screws. When he installed the flywheel and started the engine all the"stuff" tore up the coils and broke the magnets off the flywheel (the magnets on 550's are glued to the flywheel instead of being recessed).

Interceptor398

  • Administrator
  • Hero Member
  • *****
  • Posts: 1268
Re: Parts interchange
« Reply #9 on: January 27, 2016, 04:28:41 PM »
Carb O ring: Kawasaki pn # 92055-044, Arctic Cat pn# 6505-042, John Deere pn# R34812

Invader crank seals
Seal Numbers from Dennis Kirk:

Oil Cover Seal - #260676
2-piece PTO side seal - #1486
Mag side seal - #14205
« Last Edit: January 28, 2016, 02:49:37 PM by Interceptor398 »

Checkmarks

  • Full Member
  • ***
  • Posts: 176
Re: Parts interchange
« Reply #10 on: January 14, 2019, 12:55:50 PM »
Sproket:

Thank heavens you just resolved my issue.

Kawasaki Exciter coil
21049-3001 regular invader 440
21049-3007 4/6 or 89 jet ski 550

Kawasaki Pulser coil
59026-3002 Regular invader
59026-3008 4/6 or 89 jet ski 550

A regular invader stator for the invader will not work in the 4/6...