I was out on a ride in the fresh powder today. Sled runs great, and is very fast! I got into a large field where I was going full throttle on and off, traction is hard to come by when I hammer the throttle. The sled was a little sideways...and the track was spinning with not much traction. Then it happened.....the track was skipping or ratcheting on the drive cogs. This would only happen when I gave it full throttle.
I got home, and checked the track out. The track was very loose. I tightened it up, and ensured it was aligned. The cogs are looking good without wear. I had the chain case apart before this happened a couple of weeks ago to clean it up and change the fluid.
However, when I took the sled out for a test run after tightening the track, it still ratcheted.
I need some help and advice on what to look for. If you want pictures of anything let me know.
Thanks!